Composer Pro II with Twist 60 and ND Filter Setup

Quick answer

Attach the Twist 60 optic to the Composer Pro II body, mount the ND filter, and adjust the tilt for selective focus.

Setup steps

1. Mount the Twist 60 optic: Align the optic's tabs with the Composer Pro II body's slots, push in, and twist to lock. A click confirms secure attachment. If the optic doesn't click, realign and try again—forcing it may damage the bayonet.
2. Attach the ND filter: Screw the ND filter onto the front threads of the Twist 60 optic until snug. Do not overtighten. Use a filter wrench if needed, but hand-tighten only to avoid cross-threading.
3. Set your camera to aperture priority or manual: Select a wide aperture (e.g., f/2.8 or f/4) to maximize the swirl effect. The ND filter compensates for the extra light. Check your camera's meter; if the shutter speed is too slow, reduce the ND filter strength or open the aperture slightly.
4. Adjust the tilt and focus: Press the Composer Pro II's ball joint to tilt the lens, shifting the sharp focus area. Rotate the barrel to fine-tune the swirl direction. Start with a slight tilt and increase gradually—extreme tilts can push the focus area outside the frame.
5. Capture and review: Take test shots at different tilt angles and apertures. Review on the LCD to confirm the selective focus effect meets your vision. If the bokeh appears too busy, reduce the tilt or stop down one stop to sharpen the edges slightly.

Product facts

• Composer Pro II + Twist 60 & ND Filter: Focuses from 20 inches to infinity, allowing precise control over the central area of focus. You can shoot close-up details or distant scenes without swapping lenses, making the setup versatile for walkaround creative work.